A Comparison of Four Different Electrode Matrices on the Performance of Amperometric Hydrogen Peroxide (Bio)Sensors

A comparison of the analytical performances of four different (bio)sensor designs in H₂O₂ determination is discussed. The (bio)sensor designs developed were based on the use of (i) multiwalled carbon nanotubes (MWCNT), zinc oxide nanoparticles (ZnONP), prussian blue (PB); (ii) MWCNT, ZnONP, PB and ionic liquid (IL); (iii) MWCNT, ZnONP and horseradish peroxidase (HRP) and (iv) MWCNT, ZnONP, HRP and IL modified glassy carbon electrode (GCE). A performance comparison of (bio)sensors showed that the one based on HRP/IL-MWCNT-ZnONP/GCE showed the best analytical characteristics with a linear dynamic range of 9.99×10⁻⁸–7.55×10⁻⁴ M, detection limit of 1.37×10⁻⁸ M and sensitivity of 17.00 μA mM⁻¹.     

Facile Fabrication of PBS/CNTs Nanocomposite Foam for Electromagnetic Interference Shielding

In order to reduce the pollutants of environment and electromagnetic waves, environment friendly polymer foams with outstanding electromagnetic interference shielding are imminently required. In this paper, a kind of electromagnetic shielding, biodegradable nanocomposite foam was fabricated by blending poly (butylene succinate) (PBS) with carbon nanotubes (CNTs) followed by foaming with supercritical CO₂. The crystallization temperature and melting temperature of PBS/CNTs nanocomposites with 4 wt % of CNTs increased remarkably by 6 °C and 3.1 °C compared with that of pure PBS and a double crystal melting peak of various PBS samples appeared in DSC curves. Increasing the CNT content from 0 to 4 wt % leads to an increase of approximately 3 orders of magnitude in storage modulus and nearly 9 orders of magnitude in enhancement of electrical properties. Furthermore, CNTs endowed PBS nanocomposite foam with adjustable electromagnetic interference (EMI) shielding property, giving a specific EMI shielding effectiveness of 28.5 dB cm³/g. This study provides a promising methodology for preparing biodegradable, lightweight PBS/CNTs foam with outstanding electromagnetic shielding properties.     

Submicron carbon-based hybrid nano-pour-point depressant with outstanding pour point depressant and excellent viscosity depressant

We have investigated the effective utilization potential of carbon nanomaterials in the field of pour point depressants, and reported three kind of carbon-based hybrid nano-pour-point depressants with different dimensions. In this paper, poly-α-olefins-acrylate high-carbon ester pour point depressant (PAA-18) was prepared by esterification and polymerization as the basic pour point depressant. Then, the basic pour point depressant PAA18 was modified by solvothermal method with graphene oxide (GO), carbon nanospheres (Cna) and carbon nanotubes (OCNTs). The morphology and structure of the composites were analyzed by SEM, FTIR and XRD. The results showed that PAA18 was successfully in situ polymerized on GO, Cna and OCNTs. We took the simulated oil as the experimental object, and evaluated its pour point, rheological properties and wax crystal morphology, and achieved excellent results. In the three carbon-based hybrid nano-pour-point depressants with different carbon contents, the oxidation carbon nanotubes composite pour point depressant (PAA18-1 % OCNTs) with carbon content of 1 % had the best pour point and viscosity reduction effect when the dosage was 1250 ppm, which could make the pour point of the simulated oil containing wax decrease by 16 °C. PAA18-1 % OCNTs reduced the pour point by 5 °C more than PAA18. This paper provides reference for the application of carbon nanomaterials in the field of pour point depressant.     

Click Chemistry in Ultra-high Vacuum – Tetrazine Coupling with Methyl Enol Ether Covalently Linked to Si(001)

The additive-free tetrazine/enol ether click reaction was performed in ultra-high vacuum (UHV) with an enol ether group covalently linked to a silicon surface: Dimethyl 1,2,4,5-tetrazine-3,6-dicarboxylate molecules were coupled to the enol ether group of a functionalized cyclooctyne which was adsorbed on the silicon (001) surface via the strained triple bond of cyclooctyne. The reaction was observed at a substrate temperature of 380 K by means of X-ray photoelectron spectroscopy (XPS). A moderate energy barrier was deduced for this click reaction in vacuum by means of density functional theory based calculations, in good agreement with the experimental results. This UHV-compatible click reaction thus opens a new, flexible route for synthesizing covalently bound organic architectures.     

High-Pressure High-Temperature Synthesis of Mixed Nitridosilicatephosphates and Luminescence of AESiP3N7:Eu2+ (AE=Sr,Ba)

Tetrahedra-based nitrides with network structures have emerged as versatile materials with a broad spectrum of properties and applications. Both nitridosilicates and nitridophosphates are well-known examples of such nitrides that upon doping with Eu²⁺ exhibit intriguing luminescence properties, which makes them attractive for applications. Nitridosilicates and nitridophosphates show manifold structural variability; however, no mixed nitridosilicatephosphates except SiPN₃ and SiP2N4NH have been described so far. The compounds AESiP₃N₇ (AE=Sr, Ba) were synthesized by a high-pressure high-temperature approach using the multianvil technique (8 GPa, 1400–1700 °C) starting from the respective alkaline earth azides and the binary nitrides P₃N₅ and Si₃N₄. The latter were activated by NH₄F, probably acting as a mineralizing agent. SrSiP₃N₇ and BaSiP₃N₇ were obtained as single crystals. They crystallized in the barylite-1O (M=Sr) and barylite-2O structure types (M=Ba), respectively, with P and Si being occupationally disordered. Cation disorder was further supported by solid-state NMR spectroscopy and energy-dispersive X-ray spectroscopy (EDX) mapping of BaSiP₃N₇ with atomic resolution. Upon doping with Eu²⁺, both compounds showed blue emission under UV excitation.     

Tris(pentafluoroethyl)silanol Derivatives and the Lewis Amphoteric Tris(pentafluoroethyl)silanolate Anion, [Si(C2F5)3O]−

While alkyl-substituted siloxanes are widely known, virtually nothing is known about perfluoroalkyl siloxanes and their congener species, the silanols and silanolates. We recently reported on the tris(pentafluoroethyl)silanide ion, [Si(C₂F₅)₃]⁻, which features Lewis amphoteric character deriving from the pentafluoroethyl substituents and their strong electron-withdrawing properties. Transferring this knowledge, we investigated the Lewis amphoteric behavior of the tris(pentafluoroethyl)silanolate, [Si(C₂F₅)₃O]⁻. In order to examine such Lewis amphoteric behavior, we first developed a strategy for the synthesis of the corresponding silanol Si(C₂F₅)₃OH, which readily condenses at room temperature to the hexakis(pentafluoroethyl)disiloxane, (C₂F₅)₃SiOSi(C₂F₅)₃. Deprotonation of Si(C₂F₅)₃OH employing a sterically demanding phosphazene base allows the characterization of the first example of a dimeric triorganosilanolate: the dianionic hexakis(pentafluoroethyl)disilanolate, [{Si(C₂F₅)₃O}₂]²⁻, implies Lewis amphoteric character of the monomeric [Si(C₂F₅)₃O]⁻ anion.     

基于MIL⁃53(Al)的碳纳米管复合材料的制备及其用于超级电容器的性能

基于金属有机框架材料MIL?53(Al),制备出多孔碳原位生长碳纳米管(CNTs)的碳复合材料(C?MIL?53(Al)和C?Co@MIL?53(Al))。得益于MIL?53(Al)和CNTs的复合结构以及CoF2的形成,C?Co@MIL?53(Al)复合材料作为超级电容器电极时,在0.5 A·g^-1电流密度下展现出了高比电容(240.1 F·g^-1),并且经过2000次充放电循环后表现出良好的循环稳定性。     

服役温度对多壁碳纳米管/Li1.18Ni0.15Co0.15Mn0.52O2复合正极材料性能的影响

通过煅烧的方式制得多壁碳纳米管(MWCNT)质量分数为3%的MWCNT/Li1.18Ni0.15Co0.15Mn0.52O2锂离子电池复合正极材料,并测试了复合正极材料在不同服役温度环境下的电化学性能:-20和60℃下服役时,其放电容量分别高达169、303 mAh·g^-1,且展示出良好的倍率性能和循环稳定性。结合电化学阻抗测试结果可知,MWCNT均匀附着在层状粒子的表面,有效减少了电解液对电极材料的侵蚀,阻碍了表面膜的生成,同时提高了材料的电子电导率。     

Ionic/electronic conductivity regulation of n-type polyoxadiazole lithium sulfonate conductive polymer binders for high-performance silicon microparticle anodes

Low-cost silicon microparticles(SiMP),as a substitute for nanostructured silicon,easily suffer from cracks and fractured during the electrochemical cycle.A novel n-type conductive polymer binder with excellent electronic and ionic conductivities as well as good adhesion,has been successfully designed and applied for high-performance SiMP anodes in lithium-ion batteries to address this problem.Its unique features are attributed to the stro ng electron-withdrawing oxadiazole ring structure with sulfonate polar groups.The combination of rigid and flexible components in the polymer ensures its good mechanical strength and ductility,which is beneficial to suppress the expansion and contraction of SiMP s during the charge/discharge process.By fine-tuning the monomer ratio,the conjugation and sulfonation degrees of the polymer can be precisely controlled to regulate its ionic and electronic conductivities,which has been systematically analyzed with the help of an electrochemical test method,filling in the gap on the conductivity measurement of the polymer in the doping state.The experimental results indicate that the cell with the developed n-type polymer binder and SiMP(~0.5 μm) anodes achieves much better cycling performance than traditional non-conductive binders.It has been considered that the initial capacity of the SiMP anode is controlled by the synergetic effect of ionic and electronic conductivity of the binder,and the capacity retention mainly depends on its electronic conductivity when the ionic conductivity is sufficient.It is worth noting that the fundamental research of this wo rk is also applicable to other battery systems using conductive polymers in order to achieve high energy density,broadening their practical applications.     

锂离子电池Si@void@C复合材料的制备及其电化学性能

以纳米Si颗粒为核心,正硅酸四乙酯(TEOS)为SiO_2源,采用Stober法在Si表面包覆一层SiO_2,再以多巴胺为碳源,通过碳化处理将SiO_2表面的聚多巴胺层转化成碳层。最后,用HF刻蚀SiO_2并留下空隙,得到Si@void@C复合纳米颗粒。利用X射线衍射、扫描电镜、透射电镜和恒流充放电测试对材料的物相、微观形貌和电化学性能进行表征。结果表明,在0.1 A·g~(-1)电流密度下,Si@void@C负极材料充放电循环100次后充电比容量仍然有1 319.5 mAh·g~(-1),容量保持率为78.4%,表现出优异的电化学性能。